FELLING A TREE WITH A CORDLESS CHAINSAW: TIPS AND TECHNIQUE FOR SUCCESS

FELLING A TREE WITH A CORDLESS CHAINSAW: TIPS AND TECHNIQUE FOR SUCCESS

With the advent of cordless chainsaws, Felling a tree has become more accessible for DIY enthusiasts. These battery-powered tools are lightweight, quieter, and easier to maneuver, making them a solid choice for smaller to medium-sized trees. However, felling a tree still demands precision, skill, and respect for the environment and the task at hand. In this guide, we’ll walk you through the process of felling a tree with Livowalny cordless chainsaw, step by step.

  

Preparation is Key to Fell a Tree with Livowalny Cordless Chainsaw

Assess the Tree and Its Surroundings: Before you even pick up your chainsaw, you need to stand back and observe its natural tilt. Ensure the tree has a clear falling path free of obstacles such as houses, power lines, or vehicles.

Gather Your Tools and Safety Gear: Personal protective equipment (PPE) is needed, including a helmet, safety glasses, gloves, steel-toed boots, and hearing protection. A felling wedge to prevent the tree from pinching your battery-powered chainsaw or falling in the wrong direction.


Plan Your Escape Route: Always plan two clear escape routes that lead away from the tree at a 45-degree angle from its expected fall line.

 

How to Fell a Tree with Livowalny Cordless Chainsaw

 

  1. Make the Directional Notch

The directional notch is a V-shaped cut that determines the direction in which the tree will fall. To create a directional notch, make a downward 70-degree top cut to one-third of the tree's diameter, then a horizontal bottom cut to meet it, forming a wedge.


  1. Make the Back Cut

To make the back cut, move to the opposite side of the tree, about 2 inches above the notch. Cut horizontally toward the notch, stopping before it to leave a 10% wood hinge. Insert a felling wedge into the cut and tap it with a hammer to keep the cut open..


  1. Safe Tree Falling
    During tree fall, step back and use your escape route as soon as the tree begins to lean.Keep your eyes on the tree until it’s on the ground, watching for unexpected movements or falling branches.

    4. Limbing and Sectioning
    After the tree falls, remove branches starting from the base, keeping the chainsaw blade off the ground. Then, cut the trunk into manageable pieces for transport or firewood.

 

What Can You Do If the Tree Becomes Lodged During the Fall
Sometimes, a tree may get lodged or hung up in another tree during felling. This situation can be dangerous and requires caution to resolve. In this case, do not make further cuts at the base of the tree. This can destabilize the hinge and create unpredictable movements, increasing the risk of injury. You can secure a strong rope to the lodged tree, attaching it as high as safely possible.

You also can stand well outside the fall zone and use a vehicle or winch to pull the tree free. If the tree is severely lodged or poses significant risks, contact a professional arborist for safe removal.

Felling a tree with Livowalny cordless chainsaw is an accessible and effective way to tackle small to medium-sized tree removal tasks. Always remember to assess the tree, use proper safety equipment, and take your time with each step to ensure a safe and successful felling. If the job feels beyond your skill level, don’t hesitate to contact a professional arborist for assistance.